Products > Rf Automation > RF Modules
     PRODUCTS
  
   RADIO MODULES
You can use Amplitude Modulation (AM), Frequency Modulation (FM) hybrid receiver, transmitter and receiver/transmitter modules for all of your wireless command and control needs. We do use them without any problems.
   AM Modules
 

GR1 Receiver

  • Medium bandwidth Receiver offers good reliability.
  • High -117dBm receiver sensitivity.
  • Available on 433.92, 434.075, 434.225 and 434.525 Mhz.
  • Analogue, digital and RSSI outputs.
    		•

    GR2 Receiver

  • Companion reciever to the GT2 range of transmitters.
  • Single module operates from 2.7 to 10 volts supply.
  • Switchable data filter provides optimum reciever sensitivity for different data bound rates.
    		•

    GT1 Transmitter

  • Medium bandwidth transmitter.
  • Available on 433.92, 434.075, 434.225 and 434.525 Mhz.
  • Provides 1000m+ range when used with GR1 rx.
  • Available on 3 volts and 5 volts.
    		•

    GT2 Transmitter

  • 10 mW narrow band VHF transmitter.
  • Available on 151.3, 162.650, 173.225 & 173.250 Mhz.
  • Fully shielded.
  • Operation on 3 volt or 5 volt.
    		•

    GT2HP Transmitter

  • Pin connections compatible with GT2.
  • Adjustable power output from 4mW to 200mW.
  • Available on 151.3 & 173.225 Mhz.
  • Other frequencies available on request.
    		•

    GT2HP-UHF Transmitter

  • High power UHF transmitter providing 250mW transmit power.
  • Available on 458.850 Mhz.
  • Other frequencies available on your request.
    		•

    GTR1 Transceiver

  • 116dBm receive sensitivity (Best in class).
  • Up to 25mW transmit power (Best in class).
  • Double RF filtering (Best in class).
  • Available in different channel frequencies.
  • High reliability operation up to 1km.

    • MKR2AM Receiver

  • Superhet AM receiver module.
  • 5 volt operation.
  • Sensitivity -109dBm.
  • Available on 433.92, 868 and 916 MHz.
  • High noise rejection IF filter at 10.7 MHZ.
  • Compatible with MKT1 and MKT1HP.
    		•

    MKR2FM Receiver

  • Lowest cost FM receiver.
  • Compatible with 5 series transmitters.
  • Available on 434/868/916 MHz.
  • AF, Digital & RSSI outputs
    		•

    MKR5 Receiver

  • Compatible receiver for MKT5.
  • Superhet design.
  • 50dB image rejection.
  • Only 6mA consumption at 5 volts.
  • Fast carrier detect + RSSI outputs
  • Fully shielded.
    		•

    MKR5A Receiver

  • Highest Spec Superhet AM receiver.
  • 5 volt operation.
  • Sensitivity -112dBm.
  • Image rejection 50dB.
  • Available on 315, 433.92 & 868 MHz.
  • Compatible with MKT1 and MKT1HP.
    		•

    MKR5LC Receiver

  • Fully backward compatible with MKR5.
  • AF, Digital and RSSI Outputs.
  • Low cost receiver.
  • Available on 433.92 MHz.
  • Other frequencies also possible.
    		•

    MKR6 Receiver

  • Xtal/PLL stabilised receiver.
  • Available on 868/869 & 914.5MHz.
  • -105dBm sensitivity.
  • 50dB image rejection
  • 5Only 6mA from single 5v supply.
    		•

    MKR7 Receiver

  • Medium Bandwidth Receiver.
  • -112dBm sensitivity.
  • 50dB image rejection.
  • Available on 434.075 MHz.
  • 868 MHz frequencies under development.
    		•

    MKT1 Transmitter

  • Miniature 2 pin transmitter module.
  • 100% AM modulation.
  • 1.5 to 13 volt operation.
  • Up to 100m range.
  • Available on 315/318/418/433.92/868.35 & 916.5 MHz.
    		•

    MKT1HP Transmitter

  • Full 10mW erp capability.
  • ASK modulation.
  • 3 or 5 volt operation.
  • Up to 350m range.
  • Available on 433.92 MHz.
    		•

    MKT4 Transmitter

  • Narrow band VHF transmitter.
  • Available on 173, 152 MHz etc.
  • SIL or DIL footprints available.
  • 25 KHz (or lower) channel spacing.
  • Range to several Km.
    		•

    MKT5 Transmitter

  • Wideband SAW transmitter.
  • Available on 315, 418, 433 MHz.
  • Up to 128 Kbps data rate.
  • Range to 350m.
  • Fully shielded.
    		•

    MKT5B Transmitter

  • Fully backward compatible with MKT5.
  • Data rates to 40kbps.
  • EN 300-220 compliant without shield.
  • Available now on 418 & 433.92 MHz.
    		•

    MKT6 Transmitter

  • Xtal/PLL stabilised transmitter.
  • Single 2.3 to 10 volt supply.
  • Available on 868/869 & 914.5 MHz.
  • 1mW power out (20mW option-MKT6H).
  • Data to 64kbps.
    		•

    MKT7 Transmitter

  • Medium bandwidth Transmitter.
  • Available now 434.075 MHz.
  • Provides 600m+ range with MKR7 rx.
  • Other frequencies on request.
  • Reliable operation under harsh conditions.
    		•

    X2010 Transceiver

  • Available on 434.075 MHz.
  • Medium band RF technology.
  • Highest reliability transceiver.
  • Single 5v supply and low Icc.
  • Range to 300m.
  • Tx power out=1mW.
    		•

     

    © Copyright (c) 2000-2005 Sydma CONTROL All rights reserved

     
         Designed By 3NOKTA